The Keys to Getting the Perfect TV Stand

by admin

The Keys to Getting the Perfect TV Stand
By Ray K. Walberg

So, you ve gotten yourself into a new HDTV so that you re entertainment life at home will change. Well, now you re also going to have to change some of your decorating, including a new TV stand to accommodate for the bigger set.

Now that the new HDTV sets are bigger, heavier, and a bit pricier, you have to go that extra effort in remodeling your home for these new toys. However, if forking over a few hundred bucks for a stand is beyond your intentions, there are some alternatives for you to consider.

You can go ahead and grab a steel kit for about $100 bucks. These are strong kits that come in many sizes, and you can construct it in about an hour, even if you re not a professional handyman, or even a mediocre one at that. Usually, these will hold the TV, a DVD player, and a cable box. A lot of times the newer HDTV sets are equipped with a slot for a cable card, which eliminates the need for a separate, external box.

Stands will typically hold about 200 pounds quite easily, and this is sufficient for most models of TV s. If you re more into the modern look, some stands come with stylish glass shelving for all three devices, the TV, DVD player, and cable box. If you re looking for a clear shelf for the TV itself, you ll need to get strong acrylic or Plexiglass to hold it. This is a bit more expensive, but also a lot safer.

Another idea is to build your own stand out of wood. You can find tons of plans for this for free online. Here s one style that you might consider, which has list of cheaper parts.

Go out and buy two ninety centimeter by sixty centimeter (3 ft x 2 ft) planks of cedar wood, 2.5 centimeters (1 inch) thick. Cedar is naturally beautiful and doesn t need staining, even though you can use a semi-transparent stain if you like to finish the wood.

Use a saw and, starting at the bottom, cut a curved pattern. Go for a shape similar to a folk guitar. The curve makes for a great design and will add strength for support. Now you need to sand the edges smooth.

Next, groove the wood a centimeter and a quarter (half an inch) deep, more than a few centimeters (a few inches) from the top. These are what s known as dadoes . Now you ll make additional grooves for shelves that will hold the DVD, etc. You can make the grooves the old-fashioned way with a gouging tool or with a router.

Buy the shelves at the width you need for your TV. Wood is probably best and cheapest. Simply slide the shelves in, then screw in four L-shaped supports below each shelf for added support. Basically, that s all there is to it. Now you can hide the wires using tape or by adding an extra compartment if necessary.

Building your own stand is definitely the way to go if you re looking to get one on the cheap, as well as one that is customized best to your liking.

The essayist Ray Walberg is very excited about themes related to cnc machines.

Restricted Keys And How They Can Improve Your Security
Restricted Keys And How They Can Improve Your SecurityBy Allan Scothern Restricted keys are a key that you can only get cut if you have the reg...

Self Defense - Practice Makes Perfect
Self Defense - Practice Makes PerfectBy Jack Krohn It was only 5:00 PM on a cold night when she left the department store at the other end of t...

Concession Equipment Perfect for Your Concession Stand
Concession Equipment Perfect for Your Concession StandBy Anna Woodward Concession equipment is the most important investment when outfitting yo...

Everything You Need To Know When Selecting A Home Safe
Everything You Need To Know When Selecting A Home SafeBy: Steve Strong Safes come in all different shapes and sizes and with a host of different secur...

Everything You Need To Know When Selecting A Home Safe
Everything You Need To Know When Selecting A Home SafeBy: Steve Strong Safes come in all different shapes and sizes and with a host of different secur...

insidewoodworking.com/cnc/cnc_router.html">http://www.insidewoodworking.com/cnc/cnc_router.html, the reviewer expressed his capability on areas dealing with cnc router.

Article Source: http://EzineArticles.com/?expert=Ray_K._Walberg
http://EzineArticles.com/?The-Keys-to-Getting-the-Perfect-TV-Stand&id=449503


Sphere: Related Content

.

Leave a Reply